Keysight E4980A - Page 407

Keysight E4980A/AL Precision LCR Meter 407
SCPI Command Reference
Command list
SAVE
DISPLAY
Stores the state from the memories
No.
DELETE Deletes the state from the memories :MMEM:DEL:REG
RECALL Loads the state from the memories :MMEM:LOAD:STAT:REG
SAVE Stores the state from the memories :MMEM:STOR:STAT:REG
[System]
SELF TEST
TEST NO. Selects the self-test number
EXECUTE
RETUR
N
Returns to the softkey display screen one level higher
TEST
START
Starts the self-test from the test number
TEST
STOP
Stops the self-test from the test number
SERVICE
MORE
RETURN Returns to the softkey display screen one level higher
SAVE
SYS INFO
Stores the state from the memories
SYSTEM
CONFIG
BEEPER
ENABLED
OFF Disables a beep sound. :SYST:BEEP:STAT OFF
ON Enables a beep sound. :SYST:BEEP:STAT ON
BEEPER
TONE
TONE 1 Selects beep tone 1 :SYST:BEEP:TONE 1
TONE 2 Selects beep tone 2 :SYST:BEEP:TONE 2
TONE 3 Selects beep tone 3 :SYST:BEEP:TONE 3
Key Operation Function SCPI Command