Keysight E4980A - Page 406

406 Keysight E4980A/AL Precision LCR Meter
SCPI Command Reference
Command list
10-
CANCEL Returns to the softkey display screen one level higher
OK Resets the instrument setting and correction data :SYST:PRES
RETURN Returns to the softkey display screen one level higher
CLEAR
SETTING
CANCEL Returns to the softkey display screen one level higher
OK Resets the instrument settings *RST
RETURN Returns to the softkey display screen one level higher
FACTORY
DEFAULT
CANCEL Returns to the softkey display screen one level higher
OK Reverts to factory default settings with all
user-configurable data cleared.
RETURN Returns to the softkey display screen one level higher
LAN RESET
CANCEL Returns to the softkey display screen one level higher
OK Resets the LAN settings. :SYST:COMM:LAN:PRES
RETURN Returns to the softkey display screen one level higher
[Recall A] Loads the state 0 from the memories :MMEM:LOAD:STAT:REG 0
[Recall B] Loads the state 1 from the memories :MMEM:LOAD:STAT:REG 1
[Save/Recall]
MEDIA
EXT Deletes the state from the memories :MMEM EXT
INT Deletes the state from the memories :MMEM INT
SAVE DATA
RETURN Returns to the softkey display screen one level higher
SAVE &
STOP
Stores the state from the memories :MMEM:STOR
:MEM:CLE
START LOG Enables the data buffer memory to store the
measurement data
:MEM:FILL
Key Operation Function SCPI Command