Keysight E4980A - Page 59

Keysight E4980A/AL Precision LCR Meter 59
Display Format
MEAS DISPLAY Page
DECR - Decreases the test frequency to the next sequentially lower
frequency point. There are ten frequency points between successive
decade values. Refer to Table 3-9 for the frequency points that can
be set using this softkey.
DECR -- Decreases the test frequency to the next sequentially lower tenth
value after 20 Hz. Refer to Table 3-8 for the frequency points that
can be set using this softkey.
Table 3-8 Test frequency that can be set using INCR ++ / DECR --
INCR ++ / DECR --
20 Hz
100 Hz
1 kHz
10 kHz
100 kHz
1 MHz
2 MHz
Table 3-9 Test frequency that can be set using INCR + / DECR -
INCR + / DECR -
20 Hz 100 Hz 1 kHz 10 kHz 100 kHz 1 MHz
25 Hz 120 Hz 1.2 kHz 12 kHz 120 kHz 1.2 MHz
30 Hz 150 Hz 1.5 kHz 15 kHz 150 kHz 1.5 MHz
40 Hz 200 Hz 2 kHz 20 kHz 200 kHz 2 MHz
50 Hz 250 Hz 2.5 kHz 25 kHz 250 kHz
60 Hz 300 Hz 3 kHz 30 kHz 300 kHz
80 Hz 400 Hz 4 kHz 40 kHz 400 kHz
500 Hz 5 kHz 50 kHz 500 kHz
600 Hz 6 kHz 60 kHz 600 kHz
800 Hz 8 kHz 80 kHz 800 kHz
Softkey Function