Krone MX 310 GL - Weight Control (Save Full Weight)

Comfort Control Unit
111
Pos: 21.11.30 / BA/Info-Center/L adewagen/Ge wichtserfassug/ Gewichtserfass ung (Vollg ewicht speichern) Ü berschrift @ 28\mod_12501 51411508_78. doc @ 27420 9
9.10.9 Weight control (save full weight)
Pos: 21.11.31 / BA/Info-Center/L adewagen/Ge wichtserfassug/ Kurzüberblic k über die Tasten Vollgewicht s peichern @ 28\mod_125015 0855883_78. doc @ 273994
Function of the keys on menu weight control (save full weight) (after loading)
Save weight Tara
Switch to menu 2-1 "Customer counter"
Leaving the weight control with saving the weight
Leaving the weight control for the basic screen loading mode (possibly without saving)
Leaving the weight control for the basic screen unloading mode (possibly without saving)
Pos: 21.11.32 / BA/Info-Center/L adewagen/Ge wichtserfassug/ Gewichtserfass ung (Vollg ewicht speichern) @ 25\mod_124 2275551523_ 78.doc @ 250 661
ZX400080
1
Fig. 74
Note
In order to save the wagonload correctly the following points must be followed.
• The offset drawbar cylinders must be unfolded for at least 1-3 cm.
• Release the brakes on loading wagon and tractor.
• Always save the weight at first in loaded status.
• With a possibly existent Tridem axle the lift axle needs to be lowered.
• Select customer counter (see menu 2-1 “Customer counter”).
The weight control shows the current payload in the first line (1).
Pos: 21.11.33 / BA/Info-Center/L adewagen/Ge wichtserfassug/ Gewichtserfass ung Tasten B eschreibung @ 25\mod_1242 280100601_7 8.doc @ 25073 5
• By pressing the key for softkey the weight display will be left without saving and
the basic screen loading mode will be displayed.
• By pressing the key for softkey the weight display will be left without saving and
the basic screen unloading mode will be displayed.
• By pressing the key for softkey the menu 2-1 “Customer counter” is displayed (for
selection of the customer counter which should save the weight).
• By pressing the key for softkey for about 0.5 seconds the weight will be saved and a
change into the basic screen unloading mode follows.
Pos: 21.11.34 / BA/-----Seiten umbruch------ @ 0\mod_11961 75311226_0.doc @ 4165