Safety
29
Pos: 10.20.10 / BA/Sicherheit/H ydraulikanlag e Feldhäcksler @ 0\mod_119 5646239935_78. doc @ 1289
4.10 Hydraulic system
1 The hydraulic system is pressurised!
2 When connecting hydraulic cylinders and motors, make sure the hydraulic hoses are
connected as specified!
3 When connecting the hydraulic hoses to the forage harvester hydraulics, take care that
the hydraulic system is depressurised both on the tractor side and on the device side!
4 When functions are connected hydraulically between the forage harvester and the front
attachment, coupling sleeves and plugs should be identified so that faulty operation is
excluded! If the connectors are interchanged, the functions will be reversed (e.g.
raising/lowering) - Risk of accident!
5 Check the hydraulic hose lines at regular intervals and replace them if damaged or worn!
The new hoses must fulfil the technical requirements set by the manufacturer of the
implement!
6 When searching for leaks, use suitable aids to avoid the risk of injury!
7 Liquids escaping under high pressure (hydraulic oil) can penetrate the skin and cause
serious injury! Seek medical help immediately should injuries occur! Meaning of the icons
8 Before working on the hydraulic system, depressurise the system and switch off the
engine!
Pos: 10.20.11 /Ü berschriften/Ü berschriften 2/P-T/R eifen @ 0 \mod_119735 7995667_78.doc @ 18075
4.11 Tyres
Pos: 10.20.12 / BA/Sicherheit/Rei fen @ 0\m od_1195646435 716_78.doc @ 1 346
1 When working on the tyres, make sure that the implement is safely lowered and secured
against rolling (wheel chocks).
2 Installing wheels and tyres requires adequate knowledge and suitable tools!
3 Repair work on the tyres and wheels should be done by specially trained personnel using
appropriate installation tools only!
4 Check tyre pressure regularly! Inflate the tyres to the recommended pressures!
5 Check the wheel nuts periodically! Missing wheel nuts can result in a wheel falling off and
the machine tipping over.
Pos: 10.20.13 / BA/-----Seiten umbruch------ @ 0\mod_11961 75311226_0.doc @ 4165
To Next Page
Loading...
