Krone MX 310 GL - Activating the Floor Conveyor Supply During Unloading (L;GL Design Only); Switching on Rapid Traverse During Unloading (L;GL Design Only); Setting of the Initial Speed of the Floor Conveyor for the Unloading Process (D;GD Design Only); Activating the Floor Conveyor Supply During Unloading (D;GD Design Only)

Medium Control Unit
64
Pos: 19.26.8 /B A/Info-Center/La dewagen/Medi um/Kratzbo denvorlauf akti vieren beim Entla devorgang (L/G L_Ausführ ung) @ 28\mod_ 12499762451 30_78.doc @ 272790
8.11.3 Activating the floor conveyor supply during unloading (L/GL design only)
• Pressing the key (11) once activates the floor conveyor supply. (Pilot
lamp (11) lit).
• By pressing the key (11) again, the floor conveyor supply will be
deactivated (pilot lamp (11) goes out).
Pos: 19.26.9 /B A/Info-Center/La dewagen/Medi um/Kratzbo denvorlauf Eilg ang einschalten (L/ GL_Ausführung ) @ 28\mod _12499775015 98_78.doc @ 272815
8.11.4 Switching on rapid traverse during unloading (L/GL design only)
• Pressing the key (12) activates rapid traverse (pilot lamps (11+12) are
lit).
• By pressing the key (12) again, the floor conveyor supply (rapid
traverse) will be deactivated (pilot lamps (11+12) go out).
Pos: 19.26.10 / BA/Info-Center/L adewagen/Medi um/Kratzb oden- Anfangsge schwindigkeit (D/ GD_Ausführ ung) @ 28\mo d_124997532 1364_78.doc @ 272740
8.11.5 Setting of the initial speed of the floor conveyor for the unloading process (D/GD design
only)
The setting for the initial speed of the floor conveyor is made with the tailgate closed.
Use the key or to increase or decrease the speed of the floor conveyor.
Read off the set value on the bar graph (21).
Pos: 19.26.11 / BA/Info-Center/L adewagen/Medi um/Kratzb odenvorlauf akti vieren beim Entla devorgang (D/GD _Ausführu ng) @ 28\mod _124997794106 7_78.doc @ 27 2840
8.11.6 Activating the floor conveyor supply during unloading (D/GD design only)
• Pressing the key (12) once activates the floor conveyor supply. (Pilot
lamp (12) lit).
• Use the key or to increase or decrease the speed of the floor conveyor (Read
off the set value on the bar graph (21). The value is not stored).
• By pressing the key (12) again, the floor conveyor supply will be
deactivated (pilot lamp (12) goes out).
Pos: 19.26.12 / BA/Info-Center/L adewagen/Medi um/Kratzb odenvorlauf Eilga ng einschalten (D/ GD_Ausführ ung) @ 28\ mod_1249978 784505_78.doc @ 272865
8.11.7 Switching on rapid traverse during unloading process (D/GD design only)
• Pressing the key (13) activates rapid traverse (indicator lamp (12)
flashes).
• By pressing the key (13) again, the floor conveyor supply (rapid
traverse) will be deactivated (indicator lamp (12) goes out).
Pos: 19.26.13 / BA/-----Seiten umbruch------ @ 0\mod_11961 75311226_0.doc @ 4165