Krone MX 310 GL - Pick-Up Guide Wheels, Rear (Special Request); Roller Crop Guide

Settings
163
Pos: 27.4.6 /BA/ Einstellungen/L adewagen/Pic k-up/Pick-up-Tas träder hint en (Sonderwunsch) @ 0\mod_ 11998711389 71_78.doc @ 36 266
12.1.3 Pick-up guide wheels, rear (special request)
ZX400004
1 2
4
3
5
Figure 105
For marshy grounds, the pick-up can also be equipped with additional rear guide wheels that
run outside of the tractor track. On a level surface with the pick-up lowered, the height of the
rear guide wheels should be set to the same height or slightly higher than the side guide wheels
so that the main pressure will be applied against the side guide wheels. The guide wheels are
adjusted with hole link (5) left and right.
Pos: 27.4.7 /Übersc hriften/Übersc hriften 2/P-T/R ollennieder halter @ 0\mod _1201163046 930_78.doc @ 5 1122
12.2 Roller crop guide
Pos: 27.4.8 /BA/ Einstellungen/L adewagen/R ollenniederhalt er/Rollenniederh alter_Bild_Tit an_AX @ 1\m od_1201792593 623_78.doc @ 5 4624
XXL00001
Figure 106:
Pos: 27.4.9 /BA/ Einstellungen/L adewagen/R ollenniederhalt er/Rollenniederh alter_große Sc hwade @ 0\mo d_119987131 7800_78.doc @ 36285
Caution!
The roller crop guide is used for accident protection and must not be removed during operation
For large swaths, the roller crop guide (1) can be adjusted to forage weights. To do this, hook in
the chains (2) correspondingly higher.
Pos: 27.5 /BA/---- -Seitenumbruch-- ---- @ 0\ mod_1196175311 226_0.doc @ 4165