Settings
171
Pos: 27.6.22 /B A/Einstellungen/ Ladewagen/B eseitigung von Verstopfungen @ 1\mod_1 201794144405_ 78.doc @ 547 05
12.4 Eliminating Blockages
• Slightly raise offset drawbar.
• Lower the pick-up. This extends the feed area of the conveyor channel, making it easier
to eliminate blockages by turning on the PTO shaft.
• Lower the cutting system using the control panel.
• Eliminate blockage by switching in the PTO.
• In addition, the floor conveyor feed should be turned on briefly to reduce the load on the
conveyor unit.
Pos: 27.7 /BA/---- -Seitenumbruch-- ---- @ 0\ mod_1196175311 226_0.doc @ 4165
To Next Page
Loading...
