Operation
154
Pos: 25.9 /BA/Be dienung /La dewagen/Bei el ektromagnetisch er Komfortbedie nung ohne Ladeautomati k @ 0\mod_1199 793717200_7 8.doc @ 3493 9
11.4 With Electromagnetic In-Cab Comfort Kit without Automatic Loader
Note
The display for In-cab Comfort kit must be adjusted to the loading process.
See Section "Loading Process Basic Screen".
• At the beginning of loading, switch on hydraulic oil circulation on the tractor and lock the
actuating lever.
• Pick-up switch to "Lower".
The pick-up can be moved in this position during the entire loading process, making it possible
to adjust the pick-up to the ground.
• Switch on the PTO and start loading.
Note
As soon as the first load column has reached about 3/4 the total loading
height, turn on the floor conveyor feed and move the floor conveyor (load
column) back approx. 0.5 m. This will prevent the load column from tipping
over.
• To continue loading, switch on the floor conveyor. When the loading height is reached or
if the loading unit runs unevenly because the material being loaded is heavy, also turn the
floor conveyor switch "On".
Pos: 25.10 /BA/-- ---Seitenum bruch------ @ 0\m od_119617531 1226_0.doc @ 4165
To Next Page
Loading...
