Operation
155
Pos: 25.11 /BA/B edienung /L adewagen/Bei ele ktromagnetisc her Komfortbe dienung mit L adeautomati k @ 0\mod_11997 90538356_78. doc @ 34920
11.5 With Electromagnetic In-Cab Comfort Kit with Automatic Loader
Note
The display for In-cab Comfort kit must be adjusted to the loading process.
See Section "Loading Process Basic Screen"
• At the beginning of loading, switch on hydraulic oil circulation on the tractor and lock the
actuating lever.
• Pick-up switch to "Lower".
The pick-up can be moved in this float position during the entire loading process.
• Switch on the automatic loader (the time delay should be adjusted to the loading
material). (see Section "Menu 1-1 Automatic Loader" (optional))
Dry = longer time delay
Moist = shorter time delay
• Switch on the PTO and start loading.
Note
As soon as the first load column has reached about 3/4 the total loading
height, turn on the floor conveyor feed and move the floor conveyor (load
column) back approx. 0.5 m. This will prevent the load column from tipping
over.
Once the loading height is reached, the floor conveyor feed switches on automatically until
"Wagon full" appears on the display and a short horn sound is heard.
Pos: 25.12 /BA/-- ---Seitenum bruch------ @ 0\m od_119617531 1226_0.doc @ 4165
To Next Page
Loading...
