Comfort Control Unit
75
Pos: 21.1 /Übersc hriften/Übersc hriften 1/A-E/B edieneinheit - Komfort @ 0\mo d_120030786 8117_78.doc @ 39559
9 Comfort Control Unit
Pos: 21.2 /BA/Sich erheit/Gefahr enhinweise/Be dieneinheit sc hützen @ 0\m od_1200308247 867_78.doc @ 39598
Caution! - Protect Control Unit.
Effect: Damage to the control unit
• The control unit must be protected against water.
• If the machine is not used for an extended period of time (for example during the winter),
the control unit must be stored in a dry place.
• For mounting and repair jobs, especially for welding jobs on the machine, disconnect the
power supply to the control unit. Overvoltage can damage the control unit.
Pos: 21.3.1 /BA/ Info-Center/Lad ewagen/Allge meine Beschr eibung @ 0\m od_1200385494 468_78.doc @ 42882
Figure. 39
The electronic equipment of the machine consists essentially of the job computer (1), the
electronics for the hydraulic axle suspension (2) (optional) along with the control unit (3) and the
control and function elements.
The job computer (1) and the electronics for the hydraulic axle suspension (2) (optional) are
located under the front cover on the left front of the machine. Their functions are:
• Control of the loading and unloading process
• Wagonload counter
• Control of the actuators installed on the machine
• Transfer of alarm messages
• Sensor/actuator diagnostics
The control unit (3) communicates information to the driver and performs settings to operate the
machine. This information is received and further processed by the job computer.
Pos: 21.3.2 /BA/--- --Seitenumbruc h------ @ 0\ mod_1196175 311226_0.doc @ 4165
To Next Page
Loading...
