EasyManua.ls Logo

Krone MX 310 GL - At the End of the Harvest Season

Krone MX 310 GL
244 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Placing in Storage
226
Pos: 33.5 /Übersc hriften/Übersc hriften 2/A-E/A m Ende der Er ntesaison @ 0 \mod_1197385 501276_78. doc @ 19985
16.2 At the End of the Harvest Season
Pos: 33.6 /BA/Einl agerung/Lad ewagen/Einlager ung allge mein @ 0\mod_12 00295665820 _78.doc @ 39 421
Before placing the machine in winter storage, clean inside and outside thoroughly. If you use a
high-pressure cleaner to do this. do not keep a stream of water directed at bearing points. After
cleaning is completed, lubricate all lubrication points. Do not
wipe off any grease that comes out
of bearing points. The hardened grease will provide additional protection against moisture.
Remove the drive chains and wash them out in petroleum (do not use any other solvent). At the
same time, check the chains and chain wheels for wear. Oil the chains after they are cleaned,
mount them and place them under tension.
Check all movable components such as deflector rollers, joints, tension rollers, etc. to make
certain they move easily. If necessary remove, clean, grease and remount. If necessary,
replace with new parts.
Use only original KRONE replacement parts.
Disassemble the PTO shaft. Lubricate the inner tubes and the guard tube with grease. Grease
the lubrication points on the cross joint and grease the bearing rings of the guard tube.
Park the machine in a dry location, but not in the vicinity of artificial fertilisers or livestock
buildings. Repair places with damaged paint and preserve all bare metal places thoroughly with
rust protection agent.
Caution!
The machine should only be placed on blocks with a suitable vehicle lifting
device. Make certain that the machine is stable and safe when it is on blocks.
To remove load from the tyres, set the machine on blocks. Protect the tyres against external
influences such as oil, grease, direct sunlight, etc
Perform the necessary repair tasks during the time immediately after the harvest season. Draw
up a list of all replacement parts you will need. This will make it easier for your KRONE dealer to
process your orders and you will be certain that your machine will be ready for use at the
beginning of the next season.
Pos: 33.7 /BA/---- -Seitenumbruch-- ---- @ 0\ mod_1196175311 226_0.doc @ 4165

Table of Contents

Related product manuals