Krone MX 310 GL - 13 Maintenance; Special Safety Instructions; Test Run

Maintenance
175
Pos: 29 /BA/Dies e Seite ist be wusst freigelass en worden. @ 1 \mod_1201 783680373_78. doc @ 54443
Pos: 31.1 /Übersc hriften/Übersc hriften 1/U-Z/ Wartung @ 0\m od_11998835 81050_78.doc @ 36685
13 Maintenance
Pos: 31.2 /Übersc hriften/Übersc hriften 2/P-T/ Spezielle Sic herheitshinweise @ 0\mod_1196 660495760_7 8.doc @ 9134
13.1 Special Safety Instructions
Pos: 31.3 /BA/Sich erheit/Gefahr enhinweise/La dewagen/G efahr Wartung allg emein @ 0\ mod_119988406 9862_78.doc @ 36704
Danger! - When performing repair, maintenance or cleaning work on the machine, or in
the case of technical intervention, drive elements may start moving.
Effect: Danger to life, injuries or damage to the machine.
• Switch off the tractor engine and remove the ignition key
• Secure the machine and tractor against the possibility of rolling back.
• Switch off the PTO and disengage it
• After the repair, maintenance and cleaning work or technical interventions are completed,
mount all protective coverings and safety devices properly again.
• Avoid skin contact with oils, greases, cleaning agents and solvents.
• In the event of injuries or burns due to oils, cleaning agents or solvents, contact a
physician immediately.
• All other safety instructions must also be followed to avoid injuries and accidents.
Pos: 31.4 /Übersc hriften/Übersc hriften 2/P-T/ Probelauf @ 0\mod_1196782 963921_78.doc @ 14908
13.2 Test run.
Pos: 31.5 /BA/Sich erheit/Gefahr enhinweise/M ähwerke/Ver wendung von nic ht zugelassene n Ersatzteilen @ 0\mod_11 96783037140 _78.doc @ 1494 6
Danger! - Using non-approved spare parts.
Effect: Danger to life, serious injuries or loss of warranty claims as well as exclusion of liability
• Use only authentic KRONE spare parts and accessories authorised by the manufacturer.
The use of spare parts, accessories or additional equipment not manufactured, tested or
approved by KRONE will exclude any liability for consequential damage.
Pos: 31.6 /BA/W artung/Hin weis Verschleiss verri ngern @ 0\ mod_11999535 05303_78.d oc @ 37204
Note
To ensure problem-free operation of the machine and to reduce wear and tear, specific
maintenance and upkeep intervals must be observed. These include cleaning, greasing,
lubricating and oiling parts and components.
Pos: 31.7 /BA/---- -Seitenumbruch-- ---- @ 0\ mod_1196175311 226_0.doc @ 4165