Start-up
42
Pos: 14.6 /Übersc hriften/Übersc hriften 2/A-E/A nbau an de n Traktor @ 0\mo d_11997178451 94_78.doc @ 34039
6.2 Mounting onto the Tractor
Pos: 14.7 /BA/Sich erheit/Lade wagen/Schlepp erwechsel @ 1 \mod_1201784 867951_78. doc @ 54462
Warning! - Changing tractors
Effect: Damages to the machine.
After connecting, check the self steer settings and reset them if necessary. (See Section
"Adjusting the attachment (tractor/machine) for turning").
If the tractor is changed, the following needs to be checked and adjusted if necessary.
• Drawbar height - see Section "Changing the Drawbar Height and Adjusting the Hitch"
• Length of PTO shaft - see Section"Attaching the PTO shaft"
• Setting of hydraulic system (see Section "Adjusting the Hydraulic System")
• Self-steer - (see Section "Starting up for the first time with self steer")
Pos: 14.8 /BA/Sich erheit/Gefahr enhinweise/La dewagen/Stütz- und Anhängel asten des Sc hleppers nicht b eachtet @ 0\m od_119972 0048038_78.doc @ 34118
Danger! - Support and hitching loads of tractor not observed!
Effect: Danger to life, injuries or damage to the machine.
• Observe the maximum permissible support and hitching loads for the tractor!
• Hitch and secure the machine to the tractor hitch in accordance with specifications.
Pos: 14.9 /BA/Sich erheit/Gefahr enhinweise/La dewagen/Verbi ndungskabel nic ht ordnungsge mäß verlegt @ 0\mod_1 199719997413_ 78.doc @ 34099
Danger! - Connection cables not laid properly.
Effect: Danger to life, injuries or damage to the machine
• Lay the connection cables between the tractor and machine so that the cables are not
tight when cornering or using the offset drawbar and do not come in contact with the
tractor wheels.
Pos: 14.10 /BA/-- ---Seitenum bruch------ @ 0\m od_119617531 1226_0.doc @ 4165
To Next Page
Loading...
