Krone MX 310 GL - Physical Alarms

Comfort Control Unit
139
No.
Image Description Possible cause Remedy
17 Switching valve to
release the cross
conveyor has not
been actuated
Tail control is turned on but the
switching valve to release the cross
conveyor has not been actuated
Actuate the switching
valve
9.15.3 Physical alarms
No. Image Description Possible cause Remedy
101 Blade sensor Sensor or line defective - Perform a sensor test
- Check the sensor
and supply line for
damage
102 Automatic loader
sensor top
Sensor or line defective - Perform a sensor test
- Check the sensor
and supply line for
damage
103 Floor conveyor
switch-off unit
sensor
Sensor or line defective - Perform a sensor test
- Check the sensor
and supply line for
damage
104 Metering roller
monitor sensor
Sensor or line defective - Perform a sensor test
- Check the sensor
and supply line for
damage
105 P.T.O. shaft
sensor
Sensor or line defective - Perform a sensor test
- Check the sensor
and supply line for
damage
106 Tailgate sensor Sensor or line defective - Perform a sensor test
- Check the sensor
and supply line for
damage