Medium Control Unit
65
Pos: 19.26.14 / BA/Info-Center/L adewagen/Medi um/Kratzb odenrücklauf (nur bei D/GD-Ausfü hrung) @ 2 8\mod_1249979 644098_78.d oc @ 272890
8.12 Floor conveyor reverse (D/GD design only)
CAUTION! - Overload of the floor conveyor
Effect: material damages
• Activate floor conveyor reverse only briefly to avoid overloading the floor conveyor.
Fig. 30
If the discharge rollers will not turn, turn on floor conveyor reverse.
To do this:
• By pressing the key (11) (inching)
the floor conveyor reverse is
activated. The floor conveyor reverse will be activated as long as the key (11) is pressed.
(Indicator lamp (11) lit).
Activate the key (11) only briefly to avoid overloading the floor conveyor.
Pos: 19.27 /BA/-- ---Seitenum bruch------ @ 0\m od_119617531 1226_0.doc @ 4165
To Next Page
Loading...
