Malfunctions - Causes and Remedies
230
Pos: 37 /BA/Störu ngen - Ursac hen und Behebu ng/Ladewage n/Störung_Ursa che_Behebu ng Medium_Aus führung @ 31\ mod_125205 9241050_78.doc @ 303118
Malfunction
Possible cause
Remedy
During unloading operation with
activated cross conveyor, the floor
conveyor supply is not activated
by pressing key (12) once, but the
key (12) is inching.
The setting of parameter “Cross
conveyor” is wrong.
Call up the sensor test, check the
parameter “Cross conveyor ” and
set if necessary.
Pressure builts up with activated
hydraulic, but there are no
functions carried out when
pressing the medium keys.
The setting of parameter “Load-
Sensing” is wrong.
Call up the sensor test, check the
parameter “Load-Sensing” and
set if necessary.
===== Ende der Stückliste ==== =
To Next Page
Loading...
