Kyocera TASKalfa 6501i - Page 87

2N8/2N7
1-2-55
23. Fit the tray mount to the operation arm
using two M4 x 20 tap-tight S screws.
Figure 1-2-84
24. Fit the tray cover to the tray mount
using two M4 x 8 screws.
Figure 1-2-85
Tray mount
M4 x 20
tap-tight S
screw
M4 x 20
tap-tight S
screw
Tray cover
M4 x 8 screw
M4 x 8 screw