Lenze i950

Address Name / seng range / [default seng] Info
0x2859:005 PROFINET monitoring: Invalid process data Selecon of the response triggered by the recepon of invalid process
da
ta.
Process data marked as invalid (IOPS is "BAD") are received by the IO
Controller. Typically in case of
•
a PLC in STOP state,
•
alarms,
•
acyclic demand data.
Corresponding error code: 33171 | 0x8193 "PROFINET: Invalid cyclic
process data"
Associated error code:
•
33171 | 0x8193 - RANLI_CIMES_1000_20918
0 No response
1 Fault > CiA402
2 Warning
Conguring the network
PR
OFINET
Monitoring
362