Lenze i950

17.8 Delete logbook les
The logbook les can be deleted with the parameter.
Parameter
Address Name / seng range / [default seng] Info
0x2022:037 Device commands: Delete Logles Deleon of log les on the device that were exported in an earlier step
via 0x2022:036 (Export Logbook).
0 O / ready Only status feedback
1 On / start Execute device command
2 In progress Only status feedback
3 Acon cancelled
4 No access
5 No access (Inverter disabled)
17.9 Acvate loaded applicaon
The loaded applicaon can be
acvated with the 0x2022:038 parameter.
Parameter
Address Name / seng range / [default seng] Info
0x2022:038 Device commands: Acvate loaded applicaon Start of the
applicaon that is provided/downloaded by the »Applica-
on Loader«.
0 O / ready Only status feedback
1 On / start Execute device command
2 In progress Only status feedback
3 Acon cancelled
4 No access
5 No access (Inverter disabled)
17.10 Uploading the applicaon
Parameter
Address Name / seng range / [default seng] Info
0x2022:042 Device commands: Upload applicaon
0 O / ready Only status feedback
1 On / start Execute device command
2 In progress Only status feedback
3 Acon cancelled
4 No access
5 No access (Inverter disabled)
20 20%
40 40%
60 60%
80 80%
100 100%
101 No SD card connected
Device funcons
Uploading the applicaon
381