Lenze i950

Copying an oscillogram to the clipboard
For documentaon purposes, it is possible to copy the measured data of an oscillogram as a
t
able or, alternavely, the oscilloscope user interface as a picture, to the clipboard for use in
other programs.
How to copy the oscillogram to the clipboard:
1.Click the symbol in the oscilloscope toolbar. The "Copy oscillogram" dialog box is displayed.
2.Select the desired opon:
a) Curve points: the measured data is copied to the clipboard as a table.
b) Screenshot: the oscilloscope user interface is copied to the clipboard as a picture.
3.Press the OK buon. The dialog box is closed and the selected opon is copied to the clip-
board.
Addional
funcons
Oscilloscope funcon
396