Gocator Line Profile Sensors: User Manual
Protocols • 628
Indicator ID Instance Value
Encoder Value 1003 - Current system encoder tick.
Encoder Frequency 1005 - Current system encoder frequency (ticks/s).
Laser Safety 1010 -
Laser safety status.
0: laser is disabled
1: laser is enabled
App Version 2000 - Firmware application version.
Internal Temperature 2002 - Internal temperature (centidegrees Celsius).
Uptime 2017 - Time elapsed since node boot-up or reset
(seconds).
Projector Temperature 2404 - Projector module temperature (centidegrees
Celsius).
Only available on projector based devices.
Control Temperature 2028 - Control module temperature (centidegrees Celsius).
Available only on 3B-class devices.
Memory Usage 2003 - Amount of memory currently used (bytes).
Memory Capacity 2004 - Total amount of memory available (bytes).
Storage Usage 2005 - Amount of non-volatile storage used (bytes).
Storage Capacity 2006 - Total amount of non-volatile storage available
(bytes).
Alignment State 20008 -
Alignment state:
0 – not aligned
1 - aligned
CPU Usage 2007 - CPU usage (percentage of maximum).
Net Out Capacity 2009 - Total available outbound network throughput
(bytes/s).
Net Out Link Status 2034 - Current Ethernet link status.
Sync Source* 2043 -
Gocator synchronization source.
1 - FireSyncMaster device
2 - Sensor
Digital Inputs* 2024 - Current digital input status (one bit per input).
Event Count 2102 - Total number of events triggered.
Camera Search Count 2217 - Number of search states. (Only important when
tracking is enabled.)
Camera Trigger Drops 2201 - Number of dropped triggers.
Analog Output Drops 21014
(previously
Output Index Number of dropped outputs.
Indicator identifiers
To Next Page
Loading...
Need help?
General
