Gocator Line Profile Sensors: User Manual
Protocols • 629
Indicator ID Instance Value
2501)
Digital Output Drops 21015
(previously
2601)
Output Index Number of dropped outputs.
Serial Output Drops 21016
(previously
2701)
Output Index Number of dropped outputs.
Sensor State* 20000 - Gocator sensor state.
-1 – Conflict
0 – Ready
1 – Running
Current Sensor Speed* 20001 - Current sensor speed. (Hz)
Maximum Speed* 20002 - The sensor’s maximum speed.
Spot Count* 20003 - Number of spots found in the last unresampled
profile/surface.
Max Spot Count* 20004 - Maximum number of spots that can be found.
Scan Count* 20005 - Number of surfaces detected from a top device.
Master Status* 20006
0 for main
1 for buddy
Master connection status:
0 – Not connected
1 – Connected
The indicator with instance = buddy does not exist
if the buddy is not connected.
Cast Start State* 20007 The state of the second digital input. (NOTE: Only
available on XLine capable licensed devices)
Point Count 20015 - Number of points found in last resampled
Profile/Surface.
Max Point Count 20016 - Maximum number of points that can be found.
Laser Overheat* 20020 - Indicates whether laser overheat has occurred.
0 – Has not overheated
1 – Has overheated
Only available on certain 3B laser devices.
Laser Overheat Duration* 20021 - The length of time in which the laser overheating
state occurred.
Only available on certain 3B laser devices.
Playback Position* 20023 - The current replay playback position.
Playback Count* 20024 - The number of frames present in the replay.
FireSync Version 20600 - The FireSync version used by the Gocator build.
To Next Page
Loading...
Need help?
General
