Gocator Line Profile Sensors: User Manual
Protocols • 630
Indicator ID Instance Value
Processing Drops** 21000 - Number of dropped frames. The sum of various
processing drop related indicators.
Last Processing Latency 21001 - Last delay from camera exposure to availability of
all results.
Max Processing Latency 21002 - Maximum value of processing latency.
Ethernet Output 21003
- Number of bytes transmitted.
Ethernet Rate 21004 - The average number of bytes per second being
transmitted.
Ethernet Drops 21005 - Number of dropped Ethernet packets.
Digital Output Pass 21006 Output Index Number of pass digital output pulse.
Digital Output Fail 21007 Output Index Number of fail digital output pulse.
Trigger Drops** 21010 Number of dropped triggers. The sum of various
triggering-related drop indicators.
Output Drops** 21011 Number of dropped output data. The sum of all
output drops (analog, digital, serial, host server,
and ASCII server).
Controlled Trigger Drops 21017 Trigger drops from the Controlled Triggering
System (Grouped with “Trigger Drops” indicator)
Surface Processing Time 21018 Processing Time of Frame on 35XX/32XX
(microseconds)
Max Frame Rate 21019 Max Configurable frame rate given above
Processing Time (scaled by 1x10-6)
Range Valid Count** 21100 - Number of valid ranges.
Range Invalid Count** 21101 - Number of invalid ranges.
Anchor Invalid Count** 21200 - Number of frames with anchoring invalid.
First Log Id 21301 ID of the first available log entry.
Last Log Id 21300 ID of the last available log entry. It is inclusive: for
example, if first = 3 and last = 5, the available log
IDs are 3, 4, 5. If no log is available, the last ID is less
than the first ID.
Z-Index Drop Count 22000 - The number of dropped surfaces due to a lack of z-
encoder pulse during rotational part detection.
Tool Run Time 22004 Tool Index The most recent time taken to execute the tool.
Part Total Emitted 22006 - Total number of parts emitted by profile part
detection.
Part Length Limit 22007 - Number of parts emitted due to reaching the
length limit.
Part Min Area Drops 22008 - Number of parts dropped due to being smaller
than the minimum area.
To Next Page
Loading...
Need help?
General
