Chapter 2 Basic Application
2-6
Instruction Description
Open Local Variable Converts from the program screen to the local variable screen.
Open Program Converts from the local variable screen to the program screen.
Open User Function/Open
Function Block
If selects the user function/FB and select the ‘Open User Function’, converts
to User Function/FB Program screen
5) Online
Instruction Description
Connect/Disconnect Connects or disconnects with PLC.
Connect Settings Specifies the connection method.
Run
Stop
Change Mode
Debug
Changes PLC mode.
Read Reads parameter/program/comment from PLC.
Write Writes parameter/program/comment on PLC.
Compare with PLC Compares the project to the project saved in PLC
Reset PLC Resets PLC.
Clear PLC Deletes parameter/program/comment saved in PLC.
PLC Information Displays PLC information.
PLC History Displays PLC history.
PLC Errors/Warnings Displays PLC error/warning information.
I/O Information PLC I/O Sync. And displays information
Save PLC History Saves PLC History
Force I/O Displays the window for compulsory I/O setting.
I/O Skip Displays the window for I/O skip setting.
Fault Mask Displays the window for fault mask setting.
Module Changing Wizard Displays the dialog window to change modules.
Start Online Editing Starts modification during run.
Write Modified Program Writes the program and information modified during run on PLC
End Online Editing Ends modification during run.
To Next Page
Loading...
