Chapter 18 Dedicated XGR Function
18-12
4. Follow the information of Installing New Base step, click Next button.
[Dialog box]
[Description of dialog box]
a. Information: Information of Installing New Base
b. Back: It is inactive mode after base is removed.
c. Next: Move to Changing Base Finished step.
d. Cancel: Cancel the Base Changing Wizard.
Notes
Error in Installing New Base is occurred when base is not installed. If base is installed normally, error is occurred when module type is
different within setting module in I/O parameter and real installed base.
a
b
c
d
To Next Page
Loading...
