LSIS LSLV-S100 - Page 419

Technical Specification
405
Items
Description
open
collector
terminal
Multi
function
relay
terminal
Less than (N.O., N.C.) AC250V
1A,
Less than DC 30V, 1A
Analog
output,
Analog
output 1
0-12Vdc (0-24mA): Select frequency, output current, output
voltage, DC terminal voltage and others
Analog
output 2
0-12Vdc: Select frequency, output current, output voltage,
DC terminal voltage and others
Pulse train
Maximum 32 kHz, 10-12V
Protection
function
Trip
• Over current trip
• External signal trip
• ARM short circuit current trip
• Over heat trip
• Input imaging trip
• Ground trip
• Motor over heat trip
• I/O board link trip
• No motor trip
• Parameter writing trip
• Emergency stop trip
• Command loss trip
• External memory error
• CPU watchdog trip
• Motor normal load trip
• Over voltage trip
• Temperature sensor
trip
• Inverter over heat
• Option trip
• Output imaging trip
• Inverter overload trip
• Fan trip
• Pre-PID operation
failure
• External break trip
• Low voltage trip during
operation
• Low voltage trip
• Safety A(B) trip
• Analog input error
• Motor overload trip
Alarm
Command loss trip alarm, overload alarm, normal load
alarm, inverter overload alarm, fan operation alarm,
resistance braking rate alarm, number of corrections on
rotor tuning error
Instantaneous
blackout
Heavy load less than 15 ms (normal load less than 8 ms):
continue operation (must be within the rated input voltage
and rated output range)
Heavy load more than 15 ms (normal load more than 8
ms ): auto restart operation
Structure/
working
environment
Cooling type
Forced fan cooling structure (excluding some models)
Protection structure
• IP 20 , UL Open Type
(UL Enclosed Type 1 is satisfied by conduit installation