AUDIO AND NAVIGATION SYSTEM
T–109
T
FRONT ANTENNA FEEDER INSPECTION
A6E812466941W02
1. Verify that there is no continuity between the front
antenna feeder terminals A and B using an
ohmmeter.
2. Inspect for continuity between the front antenna
feeder terminals using an ohmmeter.
• If not as specified, replace the instrument
panel harness.
End Of Sie
REAR ANTENNA FEEDER INSPECTION
A6E812466942W01
1. Verify that there is no continuity between antenna feeder terminals A and B using an ohmmeter.
2. Inspect for continuity between the antenna feeder terminals using an ohmmeter.
• If not as specified, replace the rear harness.
End Of Sie
A6E8124W039
A6E8124W047
A6E8124W042
A6E8124W047