POWER SYSTEM
T–19
T
FUSE SERVICE CAUTION
A6E811066000W01
Caution
• Determine and correct the cause of the burnt fuse before replacing it with the specified type. If the
fuse is replaced before doing this, it may burn again.
End Of Sie
MAIN FUSE REMOVAL/INSTALLATION
A6E811066761W01
1. Disconnect the negative battery cable.
2. Remove the main fuse block cover.
3. Remove in the order indicated in the table.
4. Install in the reverse order of removal.
Bolt Removal Note
1. Press and remove the tabs on the main fuse
block at the positions indicated by the arrows.
2. Lift up the main fuse block and remove the bolts.
End Of Sie
POWER SYSTEM
1Nut
2 Bolt (See T–19 Bolt Removal Note)
3Main fuse
A6E8110W108
A6E8110W119
A6E8110W120
To Next Page
Loading...
