Mazda 2002 6 - Automatic Transaxle Shift Mechanism; Shift-Lock Inspection; Key Interlock Inspection; Interlock Cable Inspection

AUTOMATIC TRANSAXLE SHIFT MECHANISM
K–45
K
SHIFT-LOCK INSPECTION
A6E561630000W01
1. Turn the ignition switch to ON position.
2. Verify that the selector lever is in P position.
3. Depress the brake pedal and verify that the selector lever can be shifted from P position.
• If a malfunction is found, inspect the interlock cable.
(See K–45 INTERLOCK CABLE INSPECTION.)
End Of Sie
KEY INTERLOCK INSPECTION
A6E561609000W01
1. Verify that the ignition key cannot be pulled out except in P position.
• If a malfunction is found, inspect the interlock cable. (See K–45 INTERLOCK CABLE INSPECTION.)
End Of Sie
INTERLOCK CABLE INSPECTION
A6E561609000W02
1. Turn the ignition switch to ON position (engine OFF).
2. Remove the clip of the selector lever base plate,
then remove the interlock cable from the U-
groove.
3. Remove the interlock cable from the selector
lever.
4. Verify that the interlock cable moves freely with
the brake pedal depressed.
• If there is any malfunction, replace the
interlock cable.
AUTOMATIC TRANSAXLE SHIFT MECHANISM
A6E5616W011
A6E5616W010
INTERLOCK CABLE
BHE0514W009