Mazda 2002 6 - Rear Brake (Disc) Removal;Installation

P–24
CONVENTIONAL BRAKE SYSTEM
REAR BRAKE (DISC) REMOVAL/INSTALLATION
A6E691226980W02
1. Remove in the order indicated in the table.
2. Install in the reverse order of removal.
3. After installation, depress the pedal several times, rotate the wheel by hand, and verify that the brake does not
drag.
.
A6A6912W008
9
7
7
5
4
3
1
2
10
6
8
8
6
SST
SST
R
51.0—66.7 {5.21—6.80, 37.7—49.1}
21.6—29.4 {2.21—2.99, 16.0—21.6}
37.3—49.0
{3.81—4.99, 27.6—36.1}
N·m {kgf·m, ft·lbf}
9.8—14.7 N·m
{100—149 kgf·cm,
87—130 in·lbf}
GREASE
GREASE
RUBBER GREASE
1 Parking brake cable, clip
2 Flexible hose
3Bolt
4 Caliper
5Spring
6Disc pad
(See P–25 Disc Pad Installation Note)
7Shim
8 Guide plate
9 Mounting support
10 Disc plate
(See P–20 Disc Plate Removal Note)
(See P–20 Disc Plate Installation Note)