S–28
POWER WINDOW SYSTEM
POWER WINDOW SUBSWITCH INSPECTION
A6E771666370W01
1. Inspect for continuity between the power window
subswitch terminals.
• If not as specified, replace the power window
subswitch.
End Of Sie
POWER WINDOW REGULATOR REMOVAL/INSTALLATION
A6E771658560W01
1. Disconnect the negative battery cable.
2. Remove the front door glass/rear door glass.
3. Remove the front door speaker/rear door speaker.
4. Remove the power window motor.
5. Remove the nuts.
6. Insert hand through the speaker installation hole,
rotate the regulator drum housing in the direction
shown in the figure and disengage the regulator
drum housing from the door unit connection
hooks.
A6E7716W011
A6E7716W013
A6E7716W005
A6E7716W006
To Next Page
Loading...
