S–94
TRIM
5HB
1. Pull the trunk end trim upward, then disengage
clips A, pins B, and hooks.
2. Remove the trunk end trim.
3. Install in the reverse order of removal.
End Of Sie
LIFTGATE UPPER TRIM REMOVAL/INSTALLATION
A6E774468930W01
1. Pull the liftgate upper trim toward you, then
disengage clips A, and pin B from the body.
2. Remove the liftgate upper trim.
3. Install in the reverse order of removal.
End Of Sie
LIFTGATE SIDE TRIM REMOVAL/INSTALLATION
A6E774468940W01
1. Remove the liftgate upper trim.
2. Position the strap hanger as shown in the figure.
A6E7744W013
A6E7744W002
A6E7744W003
To Next Page
Loading...
