Mazda 2002 6 - General Procedures; Precaution (Clutch

LOCATION INDEX, GENERAL PROCEDURES
H–3
H
End Of Sie
PRECAUTION (CLUTCH)
A6E491016003W01
Clutch Pipe Removal/Installation
Note
• A common reservoir is used for the clutch and brake system fluid.
1. If clutch pipes have been disconnected any time during the procedure, add clutch fluid (brake fluid), bleed the
air, and inspect for leakage after the procedure has been completed.
2. Remove the clutch pipe using the SST (49 0259 770B). Install the clutch pipe using torque wrench SST
combination. (See GI–16 TORQUE FORMULAS.)
End Of Sie
6Clutch disc
(See H–14 CLUTCH DISC INSPECTION)
7 Clutch release collar
(See H–14 CLUTCH RELEASE COLLAR
INSPECTION)
8Flywheel
(See H–15 FLYWHEEL INSPECTION)
9 Clutch fluid
(See H–4 CLUTCH FLUID INSPECTION)
(See H–4 CLUTCH FLUID REPLACEMENT)
GENERAL PROCEDURES