TD–2
TECHNICAL DATA
ENGINE
A6E931001001W01
End Of Sie
LUBRICATION SYSTEM
A6E931001001W02
Note
• The maintenance intervals on scheduled maintenance table (See GI–33 SCHEDULED MAINTENANCE
TABLE) can only be supported by the use of following oils.
* : Always verify the oil level with the dipsticks since the engine oil capacity differs according to dipstick
specifications. (See D–4 ENGINE OIL REPLACEMENT.)
Recommended engine oil
End Of Sie
TECHNICAL DATA
Item
Engine
L8 LF L3
MECHANICAL
valve clearance
(mm {in}
[Engine cold])
IN 0.22—0.28 {0.0087—0.0110}
EX 0.27—0.33 {0.0106—0.0130}
Compression pressure
(kPa {kgf/cm
2
,
psi})
Standard
1,750 {17.8, 253}
[300 rpm]
1,720 {17.5, 249}
[300 rpm]
1,430 {14.6, 208}
[290 rpm]
Minimum
1,225
{12.492, 177.64}
[300 rpm]
1,204
{12.277, 174.58}
[300 rpm]
1,000
{10.197, 145.00}
[290 rpm]
Maximum
difference
between cylinders
196.1{2.0, 28}
Cylinder head bolt length (mm {in})
Standard 149.0—150.0 {5.86—5.90}
Minimum 150.5 {5.92}
Pushing distance of the front oil seal (mm {in})
0—0.5 {0—0.02}
(from the edge of the engine front cover)
Item
Engine
L8 LF L3*
Oil pressure
kPa {kgf/cm
2
, psi}
[rpm]
234—521
{2.39—5.31, 33.9—71}
[3,000]
395—649
{4.03—6.61,
57.3—94.1}
[3,000]
Oil capacity
Oil replacement
3.9 {4.0, 3.4}
Dipstick A: 3.1 {3.3, 2.7}
Dipstick B: 4.0 {4.2, 3.5}
(L {US qt, Imp qt})
Oil and oil filter
replacement
4.3 {4.5, 3.8}
Dipstick A: 3.5 {3.7, 3.1}
Dipstick B: 4.4 {4.6, 3.9}
(L {US qt, Imp qt})
Total (dry engine)
4.6 {4.8, 4.0}
Dipstick A: 4.2 {4.4, 3.7}
Dipstick B: 5.1 {5.4, 4.5}
(L {US qt, Imp qt})
Item
Market
Europe Except Europe
Engine oil
Grade
API SL
ACEA A3
API SG, SH, SJ, SL
ILSAC GF-2, GF-3
Viscosity (SAE) 5W-30 10W-40 5W-20
40, 30, 20,
20W-20, 10W-30,
10W-40, 10W-50,
20W-40, 15W-40,
20W-50, 15W-50,
5W-20, 5W-30
Remarks Mazda genuine Dexelia oil e.g. ——
To Next Page
Loading...
