S–64
WINDOW GLASS
WINDSHIELD REMOVAL
A6E773863900W01
1. Remove the rearview mirror.
2. Remove the cowl grille.
3. Remove the headliner.
4. Apply protective tape along the edge of the body to protect it from damage.
5. Apply protective tape to the dashboard to protect it from damage.
6. Cut the lip of the windshield molding using a
razor.
Warning
• Using a razor with bare hands can cause
injury. Always wear gloves when using a
razor.
Note
• The windshield molding is a replacement
part.
Not Reusing Windshield
1. Remove the base.
Note
• For the areas of the sealant that are difficult to cut, use a SST (piano wire) and follow the procedure under
“Reusing Windshield.”
2. Use a SST, and insert the blade into the sealant.
3. Pull through the sealant around the edge of the
glass.
4. Remove the winshield.
Reusing Windshield
Note
• Before removing the windshield from the body, mark the position of the windshield by affixing tape to the
windshield and body panel.
1. Make a hole through the sealant, avoiding pins,
from the inside of the vehicle using an awl.
WINDOW GLASS
A6E7738W006
A6E7738W022
A6E7738W007
To Next Page
Loading...
