Mazda 2002 6 - Wheel and Tire; Wheel Balance Adjustment (Aluminum Alloy Wheel

WHEEL ALIGNMENT, WHEEL AND TIRE
R–7
R
2. Adjust the toe-in turning the adjusting link.
Specification
Total Toe-in: 2±4 mm {0.08±0.16 in}
Note
• Toe change amount: 0°43′ / one rotation
3. Tighten the locknut.
Tightening torque
68.6—98.1 N·m
{7.0—10.0 kgf·m, 50.6—72.3 ft·lbf}
End Of Sie
WHEEL BALANCE ADJUSTMENT (ALUMINUM ALLOY WHEEL)
A6E741701014W01
Caution
• Adjust the outer wheel balance first, then the inner wheel balance.
• Be careful not to scratch the wheels.
Adhesive-type Balance Weight (Outer)
1. Remove the old balance weight from the wheel.
2. Remove the double-sided adhesive tape remaining on the wheel, then clean and degrease the bonding area.
3. Set the wheel on a wheel balancer, measure the amount of unbalance and the position with the mode set for
knock-type balance weight.
4. Multiply the amount of unbalance by 1.6 to get the balance weight value.
5. Select a balance weight closest to the weight
value and attach the balance weight on the
position (outer) indicated by the wheel balancer.
Example calculation of balance weight value
Indicated amount of unbalance: 23 g
{0.81 oz}
23 g {0.81 oz}×1.6 = 36.8 g {1.30 oz}
Selected balance weight value: 35 g
{1.24 oz}
Note
• When selecting a balance weight, select one
closest to the calculated value.
Example: 32.4 g {1.14 oz}= 30 g {1.06 oz}, 32.5 g {1.15 oz}= 35 g {1.24 oz}
Caution
• Use a genuine balance weight or equivalent (steel).
• When attaching the weight balance, press the balance weight with a force of 25 N {2.5 kgf, 5.5 lbf}
per 5 g for 2 seconds or more.
A6E7412W005
A6E7412W004
WHEEL AND TIRE
Z5U0212W101