CRUISE CONTROL SYSTEM
T–115
T
7. Install the grommet to the cable bracket.
8. Move the throttle, and install the end fitting of the
actuator cable to the throttle.
Caution
• Due to the possibility of actuator cable
damage, make sure there is no twisting in
the cable when installing.
9. To adjust the free play, push or pull the actuator
cable directly behind the spring two times.
10. Turn the ratchet ring in the direction shown by the
arrow to lock it.
11. Slide the lock lever in the direction shown by the
arrow to lock the adjuster.
12. Install the cover to the cruise actuator.
13. Install the plug hole plate.
End Of Sie
CRUISE CONTROL SWITCH REMOVAL/INSTALLATION
A6E812866341W01
Note
• The audio control switch and the cruise control switch use a common connector.
• (See T–99 AUDIO CONTROL SWITCH REMOVAL/INSTALLATION.)
End Of Sie
A6E8128W011
A6E8128W014
A6E8128W015
A6E8128W016
To Next Page
Loading...
