Mazda 2002 6 - Electrical Troubleshooting Tools

GI–22
ELECTRICAL SYSTEM
Vehicle-harness-side connector
Direction of view is from the harness side.
* : Part names are shown only when there are
multiple connector drawings.
Other
Because vehicle-harness-side connectors, such as
the DLC 2, have to be viewed from the terminal side,
the direction of view is from the terminal side.
End Of Sie
ELECTRICAL TROUBLESHOOTING TOOLS
A6E201700006W03
Jumper wire
• A jumper wire is used to create a temporary
circuit. Connect the jumper wire between the
terminals of a circuit to bypass a switch.
Caution
• Do not connect a jumper wire from the
power source line to a body ground. This
may cause burning or other damage to
wiring harnesses or electronic
components.
WGIWXX0101E
WGIWXX0102E
X3U000WBB