P–32
ABS/TCS
TCS (DSC) OFF SWITCH INSPECTION
A6E692167650W03
1. Remove the TCS OFF switch.
2. Inspect for continuity between the TCS OFF switch
terminals using an ohmmeter.
• If not within the specification, replace the TCS OFF switch.
End Of Sie
FRONT ABS WHEEL-SPEED SENSOR REMOVAL/INSTALLATION
A6E692143720W01
1. Remove the mud guard.
2. Remove in the order indicated in the table.
3. Install in the reverse order of removal.
.
A6E6921W010
A6E6921W009
A6E6916W001
1 Connector
2Bolt
3 Front ABS wheel-speed sensor
To Next Page
