Mazda 2002 6 - Glove Compartment Light Bulb; Panel Light Control Switch

INTERIOR LIGHTING SYSTEM
T–53
T
End Of Sie
IGNITION KEY ILLUMINATION BULB REMOVAL/INSTALLATION
A6E811460231W01
1. Disconnect the negative battery cable.
2. Remove the column cover. (See S–84 COLUMN COVER REMOVAL/INSTALLATION)
3. Remove the ignition key illumination bulb.
4. Install in the reverse order of removal.
End Of Sie
GLOVE COMPARTMENT LIGHT BULB REMOVAL/INSTALLATION
A6E811451445W01
1. Disconnect the negative battery cable.
2. Remove in the order indicated in the table.
3. Install in the reverse order of removal.
End Of Sie
PANEL LIGHT CONTROL SWITCH REMOVAL/INSTALLATION
A6E811466600W01
1. Disconnect the negative battery cable.
2. Remove in the order indicated in the table.
3. Install in the reverse order of removal.
Panel Light Control Switch Removal Note
1. Insert your hand from the lower side of the dashboard and squeeze the tabs of the panel light control switch.
2. Pull the panel light control switch forward to remove it.
End Of Sie
A6E8114W129
1Socket
2 Glove compartment light bulb
A6E8114W113
1 Panel light control switch (See T–53 Panel Light
Control Switch Removal Note)
2 Connector
A6E8114W116