T–38
EXTERIOR LIGHTING SYSTEM
6. Remove in the order indicated in the table.
7. Install in the reverse order of removal.
End Of Sie
COMBINATION SWITCH DISASSEMBLY/ASSEMBLY
A6E811266120W02
Caution
• For vehicles with DSC, the clock spring is generally not to be removed from the combination
switch as may result in a malfunction of the steering angle sensor. However, remove it only when
replacing the clock spring as a single unit by referring to CLOCK SPRING REMOVAL/
INSTALLATION. (See T–125 CLOCK SPRING REMOVAL/INSTALLATION.)
1. Disassemble in the order indicated in the table.
2. Assemble in the reverse order of disassembly.
End Of Sie
1 Connector
2Screw
3 Combination switch
A6E8112W102
1Screw
2 Wiper and washer switch (Light switch)
3 Light switch (Wiper and washer switch)
4 Body
A6E8112W103
To Next Page
Loading...
