T–190
ON-BOARD DIAGNOSTIC [AIR BAG SYSTEM]
Flowchart
• Use the following flowchart to verify the cause of the trouble.
Note
• While performing the inspection of the past malfunction code, the applicable DTCs may be added to
memory by removing or disconnecting the related parts. Inspect only the DTCs that were indicated before
inspecting.
• When DTCs of present malfunction are no longer output after present and/or past malfunctions have been
repaired, be sure to perform past malfunction display cancellation to prevent repair of malfunctions that
have already been repaired.
A6E8174W013
To Next Page
Loading...
