Mitsubishi Electric MELSEC iQ-R Series - Generating Timing Pulses; Timing Check Instructions

7 APPLICATION INSTRUCTIONS
7.26 Timing Check Instructions
1031
7
7.26 Timing Check Instructions
Generating timing pulses
DUTY
This instruction turns on the user timing clock for the specified number of scans and off for the specified number of scans.
■Execution condition
Setting data
■Descriptions, ranges, and data types
*1 Only labels assigned to SM420 to SM424 can be used.
■Applicable devices
*1 Only SM420 to SM424 can be used.
Ladder ST
ENO:=DUTY(EN,n1,n2,d);
FBD/LD
Instruction Execution condition
DUTY
Operand Description Range Data type Data type (label)
(n1) Number of scans during which the clock is turned on 0 to 65535 16-bit unsigned binary ANY16
(n2) Number of scans during which the clock is turned off 0 to 65535 16-bit unsigned binary ANY16
(d) Special relay device number of user timing clock to be
operated
SM420 to SM424 Bit ANY_BOOL
*1
EN Execution condition  Bit BOOL
ENO Execution result  Bit BOOL
Operand Bit Word Double word Indirect
specification
Constant Others
X, Y, M, L,
SM, F, B, SB,
FX, FY
J\ T, ST, C, D, W,
SD, SW, FD, R,
ZR, RD
U\G, J\,
U3E\(H)G
Z LT, LST,
LC
LZ K, H E $
(n1)         
(n2)         
(d) 
*1
       
RnCPU
RnENCPU
RnSFCPU RnSFCPURnPCPURnPCPU
(Standard) (Safety)
(Redundant) (Process)
(n1)
(n2)
(d)
EN ENO
dn1
n2