Mitsubishi Electric MELSEC iQ-R Series - Creating a Dummy Transition Condition; SFC Dedicated Instruction

13 SFC PROGRAM INSTRUCTIONS
13.2 SFC Dedicated Instruction
1439
13
13.2 SFC Dedicated Instruction
Creating a dummy transition condition
TRAN
This instruction is a dummy output which satisfies a transition condition.
For details on transitions, refer to the following.
 MELSEC iQ-R Programming Manual (Program Design)
• The RnCPU and RnENCPU with firmware version "12" or later support this instruction. (Use an engineering tool with version "1.015R" or later.)
• The RnPCPU (process) with firmware version "03" or later supports these instructions. (Use an engineering tool with version "1.020W" or later.)
Ladder ST
TRAN(s);
FBD/LD
RnCPU
RnENCPU
RnSFCPU RnSFCPURnPCPURnPCPU
(Standard) (Safety)
(Redundant) (Process)
s