Mitsubishi Electric MELSEC iQ-R Series - Writing Data to the Programmable Controller (Q Series-Compatible)

1506
15 NETWORK COMMON INSTRUCTIONS
15.1 Link Dedicated Instructions
Writing data to the programmable controller (Q series-
compatible)
J(P).ZNWR
These instructions write data in units of words to a device in the programmable controller (MELSEC-A/QnA/Q/L series) of
another station.
■Execution condition
Ladder ST
ENO:=J_ZNWR(EN,J,s1,s2,n,d1,d2);
ENO:=JP_ZNWR(EN,J,s1,s2,n,d1,d2);
FBD/LD
Instruction Execution condition
J.ZNWR
JP.ZNWR
RnCPU
RnENCPU
RnSFCPU RnSFCPURnPCPURnPCPU
(Standard) (Safety)
(Redundant) (Process)
(J) (s1) (d1) (s2) (n) (d2)
EN ENO
J
s1
d2
s2
n
d1