5 SEQUENCE INSTRUCTIONS
5.3 Output Instructions
189
5
Setting devices (excluding annunciator)
SET
This instruction turns on the specified bit.
■Execution condition
■Description, range, data type
• In safety programs executed by the Safety CPU, only safety devices and safety labels of data types described in the table
can be used.
■Applicable devices
*1 When F is used, refer to the following.
Page 193 SET F
• In safety programs executed by the Safety CPU, only the following safety devices and constants can be used.
Ladder ST
ENO:=SET(EN,d);
FBD/LD
Instruction Execution condition
SET
Operand Description Range Data type Data type (label)
(d) Set target bit device number or bit specification of word
device
Bit ANY_BOOL
EN Execution condition Bit BOOL
ENO Execution result Bit BOOL
Operand Bit Word Double word Indirect
specification
Constant Others
(DY)
X, Y, M, L,
SM, F, B, SB,
FX, FY
J\ T, ST, C, D, W,
SD, SW, FD, R,
ZR, RD
U\G, J\,
U3E\(H)G
Z LT, LS T,
LC
LZ K, H E $
(d)
*1
Operand Bit Word Constant
SA\X, SA\Y, SA\M, SA\SM, SA\B SA\T, SA\ST, SA\C, SA\D, SA\W, SA\SD K, H
(d)
RnCPU
RnENCPU
RnSFCPU RnSFCPURnPCPURnPCPU
(Standard) (Safety)
(Redundant)
(Process)
To Next Page
Loading...
