Mitsubishi Electric MELSEC iQ-R Series - Reading Clock Data from the Programmable Controller on Another Station

1586
17 CC-LINK IE CONTROLLER NETWORK INSTRUCTIONS
17.3 Reading Clock Data from the Programmable Controller on Another Station
17.3 Reading Clock Data from the Programmable
Controller on Another Station
J(P).RTMRD, G(P).RTMRD, Z(P).RTMRD
These instruction read clock data from the programmable controller on another station.
■Execution condition
Ladder ST
ENO:=J_RTMRD(EN,J,s1,s2,s3,s4,d);
ENO:=JP_RTMRD(EN,J,s1,s2,s3,s4,d);
ENO:=G_RTMRD(EN,U,s1,s2,s3,s4,d);
ENO:=GP_RTMRD(EN,U,s1,s2,s3,s4,d);
ENO:=Z_RTMRD(EN,J/U,s1,s2,s3,s4,d);
ENO:=ZP_RTMRD(EN,J/U,s1,s2,s3,s4,d);
FBD/LD
Instruction Execution condition
J.RTMRD
G.RTMRD
Z.RTMRD
JP.RTMRD
GP.RTMRD
ZP.RTMRD
RnCPU
RnENCPU
RnSFCPU RnSFCPURnPCPURnPCPU
(Standard) (Safety)
(Redundant) (Process)
(J/U) (s1) (s2) (s3) (d1) (d2)
EN ENO
J/U
s1
d1
d2
s2
s3