Mitsubishi Electric MELSEC iQ-R Series - Writing Data to the Intelligent Device Station;Remote Device Station (16-Bit Address Specified)

18 CC-LINK IE FIELD NETWORK INSTRUCTIONS
18.2 Writing Data to the Intelligent Device Station/Remote Device Station (16-bit Address Specified)
1605
18
18.2 Writing Data to the Intelligent Device Station/
Remote Device Station (16-bit Address Specified)
JP.REMTO, ZP.REMTO
These instructions write data to the buffer memory area of the intelligent device station or the remote device station (in units of
words, 16-bit address specified).
■Execution condition
Ladder ST
ENO:=JP_REMTO(EN,J,s1,s2,s3,s4,s5,n,d);
ENO:=ZP_REMTO(EN,J,s1,s2,s3,s4,s5,n,d);
FBD/LD
Instruction Execution condition
JP.REMTO
ZP.REMTO
RnCPU
RnENCPU
RnSFCPU RnSFCPURnPCPURnPCPU
(Standard) (Safety)
(Redundant) (Process)
(J) (s1) (s2) (s3) (s4)
(s5)
(n) (d)
EN
J
ENO
s1
s2
d
s3
s4
s5
n