Mitsubishi Electric MELSEC iQ-R Series - Matrix Input; Matrix Input Instruction

900
7 APPLICATION INSTRUCTIONS
7.18 Matrix Input Instruction
7.18 Matrix Input Instruction
Matrix input
MTR
This instruction sequentially reads the input of 16 pointsn columns connected to the specified input number and after.
■Execution condition
Setting data
■Descriptions, ranges, and data types
*1 Only labels assigned to device (X) can be used.
*2 Only labels assigned to device (Y) can be used.
*3 When specifying setting data by using a label, define an array to secure enough operation area and specify an element of the array
label.
■Applicable devices
*1 Only X can be used.
*2 Only Y can be used.
Ladder ST
ENO:=MTR(EN,s,n,d1,d2);
FBD/LD
Instruction Execution condition
MTR
Operand Description Range Data type Data type (label)
(s) Start device of input  Bit ANY_BOOL
*1*3
(d1) Start device of output  Bit ANY_BOOL
*2*3
(d2) Start device for storing the matrix input data  Bit ANY_BOOL
*3
(n) Number of input columns 2 to 8 16-bit unsigned binary ANY16
EN Execution condition  Bit BOOL
ENO Execution result  Bit BOOL
Operand Bit Word Double word Indirect
specification
Constant Others
X, Y, M, L,
SM, F, B, SB,
FX, FY
J\ T, ST, C, D, W,
SD, SW, FD, R,
ZR, RD
U\G, J\,
U3E\(H)G
Z LT, LST,
LC
LZ K, H E $
(s) 
*1
       
(d1) 
*2
       
(d2)         
(n)         
RnCPU
RnENCPU
RnSFCPU RnSFCPURnPCPURnPCPU
(Standard) (Safety) (Redundant) (Process)
(s) (d1) (d2) (n)
EN ENO
d1
d2
s
n